Why is it necessary to hire a professional to lay the tiles?
When you are laying tiles, it is very important that the surface on which you are laying the tiles is stable, but also dry and clean of all impurities. Also, the surface must be flat and undamaged. In the case of floor tiles, it is necessary to make a slight leveling towards the drain, due to the possibility of spilling a large amount of water. Also, it is necessary to prepare a sufficient amount of tiles, because subsequent purchase can be problematic. It may happen that you don”t find the tiles you originally bought on sale later, if you need a refill. For all these reasons, it is best to hire a ceramist who has enough experience, as well as the necessary tools, as well as a tile cutting machine.
What should be considered when installing tiles?
When it comes to laying the tiles, it is necessary that the surface on which the tiles are laid is clean and dry. Also, it is important to make a leveling layer. Tiles will last for years or even decades only if the surface is flat and free of dirt. The tiles should have the same distance. In order to get the same distance between the tiles, you can use tile crosses that you can find in different dimensions, depending on whether you want wider or narrower joints.
Why do I need to install tiles?
The tiles are waterproof, resistant to environmental influences and resistant to temperatures. They are easy to wipe off and tolerate practically any cleaning agent. Therefore, they are widely used both outdoors and indoors. Tiles are therefore easier to maintain, compared to other wall and floor coverings. Also, the tiles do not need to be painted or varnished afterwards, as is the case with other coverings. For all these reasons, tiling can be very useful.
What should be done before laying the tiles?
Tiling When installing tiles, keep in mind that it is very important that the substrate is properly prepared, clean, dry, firm and stable. Old tiles, if you do not glue over them, must be thoroughly removed and all cracks and unevenness repaired. Before applying the glue, it is necessary to apply a primer. In the case of floor tiles, use a spirit level to check the slope of the floor. The drop must be towards the drain, in case a large amount of water comes out. In any case, it is best to hire an expert and save your precious time. Also, an experienced craftsman will know exactly what needs to be prepared and how, before gluing the tiles
To install the tiles, you first need to prepare the substrate. To prepare the substrate, you need cleaners and plaster, a primer and a trowel in various sizes for applying plaster and primer. For tiling, in addition to floor or wall tiles, you need tile adhesive, grout, leveling compound and silicone compound. You will also need the following tools: tape measure, spirit level, bucket, rubber gloves, trowel, sponge, mixing paddle, straightening angle, tile hammer, tile crosses and tile cutting machine.
How should the tiles be placed?
Placing tiles can be done in several ways, depending on your preference. Most often, the tiles are laid parallel or diagonally. You can combine two or more colors or use your imagination and maybe make a mosaic.
How long does it take to install the tiles?
Installing tiles can take a day or two because different adhesives and mortars need to dry for several hours. It is important to follow the instructions regarding the drying time.
How much money is needed to install the tiles?
Depending on the agreement with the craftsman you have chosen, the prices for the installation service may vary. On the Bellcom.rs portal, you can post a job posting and you will receive several offers from craftsmen.
