Why is it necessary to hire a craftsman to repair the cistern?
Frequent problems in the operation of the cistern can annoy you and cause additional costs in your budget. The toilet is in daily use, so the defect should be repaired as soon as possible. This is all very inconvenient because most often we have a situation where the water always leaks a little. In this way, a considerable amount of water comes out, which can increase costs. In most cases, it happens that the two main parts in the cistern are defective – the bell for the cistern and the float. Water leakage can suddenly increase. If your cistern is faulty during the day, up to 100 liters of water are used up, which flows out of it without you using it at all. This is a cost that you can avoid if you fix the fault in time and thus save money. For this reason, the repair of the cistern must be done on time. That”s why it”s best to hire professionals who will accurately determine the fault and repair your cistern.
What should you pay attention to when repairing a cistern?
In order to avoid the resulting damage, there are several things to consider when repairing a kettle. The water from the appropriate supply must be turned off, otherwise there is a risk of flooding. When cleaning or replacing components, the special characteristics of each individual model must be taken into account. If certain components are installed incorrectly or improperly, the problem can become worse. Proper handling of seals is also particularly important, otherwise there is a risk of unpleasant surprises when the cistern is activated.
What are the benefits of professional cistern repair?
The repair of the cistern can only be successful if the exact cause of the failure is determined. An expert will identify the real cause of the problem and fix it in a targeted manner. In this way, the risk of worsening the problem is avoided and money is saved.
What preparations need to be made when repairing a cistern?
Repair of cistern Repair of cisterns is simpler with ordinary surface cisterns. It”s a little more complicated when it comes to built-in cisterns. In this case, you have to remove the decorative panel first to get to the cistern. Before repairing the cistern, you must turn off the water. On the side of the cistern there is either a valve or a main water tap that must be closed.
What material do you need to repair the cistern?
Correct tools are required to repair the cistern. First, you need a pair of water pump pliers to turn off the main water tap or close the valve on the cistern. Depending on the model of the cistern, you may also need a wrench and ratchet. Depending on the cause of the problem, spare parts such as floats, valves, seals may also be required. It is especially important that the spare parts correspond to the appropriate model of the cistern. You can seek advice in specialized stores.
What types of cisterns are there?
There are different types of cisterns. First of all, a distinction is made between surface cisterns and hidden cisterns. Surface cisterns are visible behind the toilet and are therefore easily accessible for repairs. On the other hand, hidden cisterns are built in and therefore not visible, only the flush button is visible. In addition, the types of cisterns differ depending on the manufacturer, age and model.
How long does the cistern repair take?
The repair time of the cistern depends on the model. With a surface-mounted model, most problems can be solved in a short time. In the case of hidden models, the repair takes more time, because the cistern must first be made accessible.
