Why is it advisable to entrust the installation of pellet heating to a professional?
When installing a pellet stove, you need to pay attention to several things: For example, the chimney must be of the right size so that the smoke can escape easily, there must be free space around the stove – on the floor and on the wall. We must remove flammable objects as far as possible from the stove. In order to meet all requirements and to be able to put the pellet stove into operation after installation, it makes sense to have the pellet heating installed by an expert. We recommend that you use our site to find out about companies in this area. Or simply publish the required service so that companies/artisans approach you with relevant offers.
What should be paid attention to when installing pellet heating?
After installation, pellet heating must be inspected by a chimney sweep, who will check whether fire safety regulations are followed. Only then can the pellet stove be connected and put into operation. As the name suggests, pellet heating uses pellets as a fuel, which is actually a solid fuel created by the technological process of grinding, drying and pressing wood or some other Wood pellets are most often used. If you want to heat in this way, you need to have boilers that are specialized for pellet heating, but the good thing is that you can use existing boilers by simply upgrading the pellet burner. Apart from the boiler itself, which is the
What are the advantages of pellet heating compared to others?
Pellet heating Pellet heating is still a novelty in our area, but more and more households decide to entrust the heat of their home to this particular heating system, not only because it is an ecological heating system that does the least harm to our planet, but also If you yourself were thinking of Whether heating with pellets will pay off for you or not will depend on where you live and what time of year you purchase the pellets. For example, in some areas, firewood can be very affordable, and pellets here are a luxury that not everyone can afford. In addition, as the production of pellets requires a factory, it should be noted that you cannot make pellets yourself, while if you heat with wood, you can easily find firewood yourself. This situation also contributes to the fact that pellets are sometimes expensive, especially if there is a shortage, which depends on the market itself. If you buy pellets in summer, you will pay much less.
What is a pellet?
It is firewood that was created by compressing wood mass such as sawdust and shavings. Depending on the manufacturer, that is, on the way in which the wood mass is supplied, it can be beech, oak, cork or a mixture of different types of wood. The production process includes grinding, drying and pressing. When pressing under high pressure, the temperature of the wood rises and the natural adhesives in the wood mass are released, so no additional chemicals are used for bonding. This makes pellets an ecological fuel, which, in addition to protecting the natural environment, also protects the boiler or stove where it burns, thanks to its cleanliness. The pellet is produced in cylindrical granules with a diameter of 6 to 8 millimeters and a length of one to four centimeters. It is packed in 15-kilogram nylon sacks and on pallets, each of which holds 70 sacks, which is approximately one ton.
How much does it cost to install pellet heating?
The first and basic cost is the purchase of a boiler. The boiler is chosen depending on the square footage to be heated. It is not possible to give precise data on how many kilowatts are needed per square meter, because it depends on many factors, such as the quality of construction, the quality of carpentry, insulation… The roughest estimate is that one hundred square meters of well-insulated space could be heated with about eight kilowatts, while Of course, it should always be slightly higher than the obtained calculation, in order to ensure operation without load even during the biggest winter minuses. Depending on the manufacturer of the boiler, the costs also differ. Some boilers have a built-in water pump, some do not, so it is necessary to buy it, or to use the existing one in the heating system itself. After that, it is necessary for the master to install it, that is, to connect it to the central heating system and to the chimney. Only after that, the authorized service personnel of the manufacturer from which you bought the boiler come, check whether it is connected properly and put it into operation. So, the best thing to do is to ask the handyman you plan to call to install your boiler which boiler would be best for your square footage and heating system. Expect that there will be additional costs after purchasing the boiler. Depending on the system, in addition to the boiler, many other elements are needed (flue pipes, copper pipes, mixing valve…) in order to connect the boiler and put it into operation. That specification can be made most precisely by the craftsman when the boiler arrives.
