When is it advisable to have a professional lay the surface on a children”s playground?
Children”s safety on playgrounds is very important and should always be considered first. Playgrounds are best placed on soft surfaces such as lawns or sand, but if this is not possible, it is necessary to install a children”s playground surface as protection in the event of a fall. Recently, in places where there are no soft natural surfaces, artificial grass is increasingly being installed, which is resistant to all weather conditions, rain, snow, as well as various wear and tear, as well as a rubber surface that is very easy to maintain. In order to be sure that your child will be protected on the children”s playground that you have decided to build, it is best to hire an expert to take care of the selection and installation of the surface on the children”s playground.
What should be taken into account when laying the surface on the children”s playground?
Laying the surface on the playground for children When placing the surface on the children”s playground, it is necessary to ensure that the surface is soft and stable, because if it moves, it can endanger the safety of children.
What are the advantages of installing a surface on a children”s playground?
The surfaces on the children”s playground cushion falls, so the risk of injury to children playing is significantly reduced. They are also easy to lay down and can be removed quickly and easily at any time. These surfaces are easy to maintain as only occasional cleaning or rinsing with a hose and water is sufficient.
What should be done before installing a fall protection surface on a children”s playground?
Fall protection mats require a flat, firm surface. Therefore, any existing unevenness must be removed, and the surface must be concreted or rammed. If the substrate is placed on the ground, it is best to use machines to level and compact the soil.
What material are fall protection pads made of?
Fall protection mats are made of rubber granules, rubber fibers or synthetic rubber. If you prefer to create a natural environment, you can opt for natural materials such as sand.
What alternatives are there for fall protection pads?
Instead of artificial substrates, you can also use natural substrates such as shredded tree bark or sand. Although these materials are less effective at absorbing falls, they are sufficient for devices of smaller heights and are usually much less expensive than artificial fall protection surfaces.
How long does it take to lay the surface on the children”s playground?
How much time it takes to lay the surface on the children”s playground depends primarily on the nature of the floor and the accompanying preparatory work. If the floor needs to be excavated, filled, compacted and concreted, you should expect several days of work. However, if you opt for natural mats and place them directly over the existing surface, the job can be done in a matter of hours.
How much does it cost to install a surface on a children”s playground?
The price of laying a surface on a children”s playground depends on the surface to be covered as well as on the nature of the floor and accompanying preparatory work. Various aspects can increase the price, and for this reason it is best to have an expert present who will estimate the costs on site and make a list of the necessary materials.
