Leave the installation of the antenna cable to the professionals
The antenna or television cable must be connected and placed correctly, otherwise we may have disturbances in the image, i.e. signal reception will not be satisfactory. For this reason, it is best to leave the installation of the antenna cable to professionals so that the above problems do not occur.
What should be considered when installing the antenna cable?
If you have decided to install the antenna cable yourself, make sure that the cable is laid flat. Bends in the cable damage it and this can lead to interference in reception. Also take care not to place the cable too tightly, as pulling force can also cause damage. If the power cable and antenna cable are connected together, you must insulate the power cable well, otherwise the power signals may seriously degrade the picture quality.
Why is the correct placement of the antenna cable important?
There are many reasons why it is necessary to run an antenna cable through the apartment. For example, one of the rooms in your house does not have a connection or you want the TV to be in a different place in the room. When installing the antenna cable, try to hide it well, because no one wants to see or trip over the antenna cable every day.
What preparations should be made if you want to install the antenna cable?
Installing the antenna cable Before starting work, carefully consider where you will need the cable connections and the best way to route the cable. You have to consider whether it is more appropriate to drill holes through the walls or run the cable through the floor and use a door. If you are renovating the premises, you can place the cable under plaster or wallpaper. It takes time to break the slits in the plaster, but once you”ve installed the cable, it”s hidden forever. You can also lay the cable along the floor and hide it under parquet or carpet. Think about where and how many junction boxes are needed, as you can connect several junction boxes from one point or run a line from one connection point to the next. You can find the junction boxes needed for this in specialized stores. Also get double-shielded antenna cable and the required amount of end jacks, splitters, and intermediate jacks.
What materials will you need when installing the antenna cable?
If you decided to hide the cable in the wall, then you will need a drill and a wall router for this job. To replaster a wall, you need plaster and paint. You will also need a bucket, spatula, sandpaper or orbital sander. You can also run the cable through the pipes, but for that you have to make a deeper channel in the wall. This is very practical, as the cables can be re-tensioned in it, and cable faults are also easier to repair.
Which type of antenna cable suits you best?
If you live in a rented apartment, it is better to lay the cables on plaster or obtain permission from the landlord. However, this is not a problem if you use a cable duct that can accommodate several cables. Attach this to the wall, another option is to use skirting boards with an integrated cable channel. If you own a house or apartment, you can install the cable in the wall. Another possibility is to set up a new connection from the cable television distributor.
