Gas stove installation – hire a master
Installing a gas stove can seem quite simple considering that it is done in a home appliance. However, you must keep in mind that this appliance must be connected to the gas supply system, so in this case very careful handling is recommended. The gas is an odorless and tasteless gas and therefore it is mixed with a small amount of a harmless chemical agent with a strong smell (odorant), which gives the gas a characteristic smell so that it could be felt in the event of a leak. When burning gas, a very small amount of harmful products is released, which makes it one of the most ecologically clean energy sources for households and catering. Proper use, regular maintenance of gas appliances and proper installation improve the safety of people and property. In order for everything to be set up and installed in the right way, it is best to hire a master who will guarantee the safety of the devices and installations.
What should you pay attention to when installing a gas stove?
The most important requirement for the installation of a gas stove is safety. Especially when the stove is built into the kitchen combination, the distances and connections must be correct. In particular, the following must be taken into account: the plastic parts of the built-in furniture must be resistant to temperatures up to 130°C, the protective gas hose must be no longer than 1.5 m, there must be a heat protection strip between the cabinet and the gas stove, the minimum distance from the hood is 65 cm, and the minimum These are just a few essential things important when installing a gas stove in combination with other kitchen elements.
What are the advantages of a gas stove?
Installation of a gas stove Since gas is much cheaper and more environmentally friendly than electricity, you can easily contribute to the preservation of the environment. In addition, once you get used to a gas stove, cooking is much more efficient, because you don”t have to wait for the hotplate to get hot enough. Since the flame is ready for use immediately after switching on, you can prepare your meal much faster. So, with a gas stove, you save both time and money.
What preparations should be made for the installation of a gas stove?
In many places, a gas stove must be installed by a licensed installer. There are often regulations for annual stove maintenance. During the installation, two lines must be laid, the electric line for the lighter and the light, as well as the gas line. Sufficient space must be provided for it, as well as for the stove and the gas cylinder.
Tips for checking the correctness of gas stoves
Regularly change the rubber bands on the connection of the regulator and the gas bottle, at least once every two years replace the connecting pipe between the bottle and the stove, occasionally check the quality of the connections of the connecting pipe on the regulator and at the entrance to the stove, pay attention to the characteristic smell that occurs during uncontrolled gas discharge. If you notice that gas is leaking somewhere, immediately close the gas bottle or the valve on the natural gas supply and call the service. In this case, ventilate the room well and do not use an open flame in it and do not turn on or off electrical consumers.
Take care of the safety of gas cylinders
The bottle should always be kept in an upright position. When it comes to households, flammable materials, such as newspapers and rags, should not be kept near the bottles. Also, the bottles should be at an adequate distance from heat sources, such as stoves or stoves. Gas cylinders should not be kept in the basement or above manholes, because liquid petroleum gas is heavier than air and if there is a leak, everything will go down, which creates a great risk of explosion. Do not expose the gas cylinder to sources of heat, i.e. temperatures higher than 40°C (sun, fire, etc.) The place where the cylinder is placed must be regularly ventilated. Keep the gas cylinder out of the reach of children.
