Is it advisable to flush the underfloor heating yourself?
Flushing the underfloor heating needs to be done from time to time. There are many things to consider when cleaning underfloor heating. Improper handling can lead to damage that can cost you dearly. That is why this work should always be left to experts who have experience.
How can I clean the underfloor heating myself?
If you decide to flush the underfloor heating yourself, you should do it step by step. First, check if there is a problem somewhere. If necessary, turn off the pump. Then close the valves to prevent water leakage. After that, you can connect the flushing device to the heating system pipe. The underfloor heating system is then flushed with reduced water pressure. Constantly monitor the water pressure using a manometer. Each radiator is flushed individually. Open each radiator and then close them again. Check that the radiators are well cleaned. Rinsing time per heating element should be about 30 seconds to a maximum of two minutes. After all radiators have been flushed, the boiler and main manifold can be flushed if necessary. As soon as the cleaning is successfully completed, you can open the closed valves, restart the pump and heating and check for leaks. .
Why is it necessary to clean underfloor heating?
Heating systems require, in addition to regular maintenance, cleaning after a certain period of time in operation. The system can, caused by oxygen-permeable heating pipes, become cloudy and become partially or completely defective. Flushing the underfloor heating can solve the problem here.
What needs to be prepared before cleaning?
Flushing of underfloor heating To flush your underfloor heating, find out exactly what your heating model is and follow the instructions for flushing your underfloor heating. Make sure the flushing system is installed correctly and don”t forget to open and close the valves.
Which material is needed for flushing underfloor heating?
From the materials, you will need hoses, a pressure gauge, a bucket, a pump, and, if necessary, chemical cleaning agents to flush the underfloor heating. Before using chemical cleaning agents, ask about regulations in accordance with the Water Protection Ordinance and take precautions.
How long does it take to flush the underfloor heating?
A complete cleaning of the underfloor heating system usually takes several hours. Even with professional cleaning, you should expect at least 7 – 8 hours.
How much does it cost to flush the underfloor heating?
Prices may vary. That”s why it”s best to post a job posting on the Bellcom.rs portal and wait for experienced craftsmen to contact you.
