Why should you cover the bike with foil?
If you want to refresh the look of your two-wheeler, covering it with foil can be the solution. Foiling has long been common in the automotive sector. Excellent results can be achieved here with relatively little effort. It is best to use foil that is resistant to water, UV radiation, and minor mechanical damage (stones, scratches, etc.). The big advantage when it comes to wrapping bikes with foil is that the foil preserves the paint and can be easily removed, so when you decide to change the appearance of the bike again, just remove the foil and put another one and the paint under the foil will be the same as before the foil was installed. When installing the film, precision and expertise are required. Improper work can lead to the formation of bubbles that will spoil the appearance of your bike. For this reason, this work is best left to professionals.
What should be considered when wrapping a bicycle?
As we have stated, when covering bicycles with foil, precision and experience are required. Unprofessional work leads to the appearance of bubbles that are very difficult to remove, even with a hot air blower. It is especially difficult to foil pipes that are wider on one side. Especially the fork, whose tubes are not only narrowed towards the bottom, but also curved, represent an almost impossible task for the wrapping machine. Prepare for a lot of working hours and don”t get discouraged.
What are the advantages of having a professional cover the bike with foil?
Covering bicycles with foil A professional can also wrap the weld seams and frame bearing shell. As a rule, it is not feasible for laymen. It is also not a problem for professionals to use several colors, patterns or letters. Covering bikes with film requires a lot of experience, skill and patience. Measuring, cutting and applying the film requires very precise work.
What preparations need to be made for wrapping with foil?
Before starting to cover the bikes with foil, first of all, the foil should be provided. Look for special bike wraps, as they are intended for bikes and the contents of the package correspond to the need to completely cover the frame. Disassemble all accessories and carefully clean the frame. The frame must be completely free of dirt and grease so that the film can adhere optimally.
What material do I need?
To wrap bicycles with foil, you need the following materials: tape measure, knife (new blade) or scalpel, cleaner, hot air blower.
How do I wrap a bike with foil?
First of all, everything should be prepared before starting the work. Provide adequate lighting. After you have removed all accessories and carefully cleaned the frame, you can begin. Measure the area to be glued. Be very specific about this. If you want a clean result, pay attention to every millimeter. Use a box knife or scalpel to cut the foils. The blade should be very sharp. To make the cut straight, it is best to use a spirit level as a cutting aid. Now put on the self-adhesive film. Heat the foil with a hot air blower. This makes it flexible and easier to fit around the frame. Use a squeegee to remove bubbles and creases and smooth the film. Cut off the excess foil with a knife or scalpel.
How long does it take to wrap a bike with foil?
Covering bikes with foil takes a lot of time. Unlike a car, there are few large surfaces, but many edges and narrow pipes. This makes the process extremely difficult. If you are inexperienced, plan a whole weekend.
How much does it cost to cover bicycles with foil?
On the Bellcom.rs portal, you can post an ad and wait for offers from several companies engaged in this business. Compare offers and prices before you decide.
