Do you need sheet metal repair?
Need bodywork repair – hail damage repair, parking lot damage repair, or car accident damage repair? Post the required service on bellcom.rs. Add as many photos as possible so that the repairmen have a real insight into the extent of the vehicle”s damage. You”ll get quotes from local handymen/tinsmiths, and it”s up to you to choose the best deal based on price and reviews from previous customers.
What should you pay attention to when repairing sheet metal damage?
If it”s a small sheet metal damage, be sure to try to repair the damage by bulging. This is definitely the cheapest option. If you hire a professional to repair the bodywork, nothing will be visible after the dent is removed. Sometimes it is necessary to repair the damage to the paint after removing the dent; and in this case, a professional can repair the damage to the varnish in such a way that nothing can be seen later. In case of major sheet damage, the dented part must be removed and replaced with a new one. This variant often causes high costs, because the new part often has to be painted in the color of the car. You also have to consider the cost of installing and removing the part. Replacing the doors is more expensive than replacing the hood because of the electronics built into them for the window regulators and central locking.
What are the advantages of sheet metal repair?
Repair of sheet metal Even if the sheet metal damage does not affect the ability to drive the vehicle, the damage should be repaired. Damage makes the car look older than it really is and increases wear and tear and rust formation. In addition, the value of the car drops sharply even as a result of minor sheet metal damage. In order to get a good price later on when selling, you should have the bodywork repaired in time.
What preparations should be made for repairing the bodywork?
The preparations to be made depend on the type and extent of sheet metal damage. When replacing a dented part, you must get a new one and paint it the same color as the car. The sheet metal repair technique also depends on the type and extent of damage to the sheet metal to determine which is best. Good special tools used by professionals make the work much easier and also lead to very good results. However, since the special tool is also very expensive and can cost several thousand euros and you need to have manual skills yourself to get a good result, it makes sense to hire a professional to do the job anyway.
Repair of sheet metal damaged by hail
Ironing with a hammer is still the basic method for many. The advantage is that even the most severe damage can be repaired, but there is almost always damage to the paintwork, so you need to invest in painting. The so-called the spoon is placed on the lower side of the surface, and it is hit with a hammer from above. On the Internet, you can find various instructions for self-repair of hail damage. This usually involves heating the sheet with a hair dryer, followed by cooling with dry ice or liquid carbon dioxide. The effectiveness of this method depends on many factors, and there is also the possibility of doing even more damage. If you plan to do it yourself, familiarize yourself with the procedure first. Of course, it is best to keep the car in the garage, but few drivers have that luxury. Therefore, it may be wise to always keep a blanket or tarp in the car, so if you suspect that a hail storm may occur, cover the car in time.
