Should you hire a professional to fix car dents?
Practically every car owner in his life is faced with the need to remove small dents on his car. To remove dents that do not require painting, the service will take a lot of time, and the costs will be unreasonably expensive. Fixing a dent on a car is a process that may seem complicated at first, but once you have to do this job, your opinion will change. If you are still not ready to embark on such a venture, hire an expert who will do this professionally.
What should be considered when repairing a dent on a car?
To fix car dents, you need one thing first: experience. It is a purely mechanical job that requires great precision. There”s not much that can go wrong, but it”s unlikely that you”ll be able to fix the bump on the inside without professional help.
Why is car dent repair necessary?
Bumps on a car look anything but pretty. However, as long as the paint is not damaged, you will not damage the car. For visual reasons, you should still remove unsightly dents, and if the paint is cracked, it”s especially important to repair the damage quickly to protect the car from rust. Therefore, correcting dents on a car has an aesthetic and a protective factor.
The principle of correcting dents on a car?
Fixing a dent on a car The repair of the damaged bodywork of the car is carried out after dismantling the lining from the inner/bottom side of the element. Depending on the position of the damage, the bodywork of the car is repaired with a lever system if the damage is accessible from the inside. If it is not possible to approach the dent/damage in this way, then a system of extracting the dent from the outside using glue and appropriate tools is used. After the repair, the trims are put back in place, the car”s bodywork is once again thoroughly inspected and cleaned, and then the car”s dent correction is complete.
What are the options for removing bumps?
If it”s just a small bump and the paint isn”t damaged, you can also use hot glue to remove the bump. You can find special car dent repair kits online that include a hot glue gun, special glue sticks, a repair bridge, spatulas, and accessories. Place hot glue on the indentation and press the bridge onto it. Pull it, dent the car, remove the glue and you”re done.
Ironing method
This is the oldest method used when straightening sheet metal, and it is applied by all sheet metal workers. It will take the least amount of money out of your pocket on average. With the help of special hammers and shims, all minor damages can be corrected and returned to their original state, but the problem is that with this somewhat rough method, the paint and varnish can be damaged, so later it is necessary to paint the corrected part, and in the end everything can cost you twice as much So do your research before hiring a tinsmith, as there are very few who can do it right.
