Who should install the foil for the car roof?
A lot can go wrong when installing a car roof wrap. In the worst case, improper application leads to high repair costs. If you try to install the film yourself, there is a risk that careless gluing will result in bubbles and waves. This not only looks unattractive, but also leads to permanent damage to the foil. The car must also be completely clean, so that dirt particles do not get stuck between the paint and the foil. So, if you want to be sure, it is better to hire a professional to do the installation of the film on the car roof.
How do I install the car roof film myself?
If you still want to install the foil for the car roof yourself, you must first thoroughly remove impurities and degrease it. Any surface irregularities, including scratches, dents and rust, can cause the film to warp. In addition, to avoid unsightly waves and creases, use only foils of the correct size. The work is done from the inside out. It means: the foil is attached in the middle and gradually expands to the edges. The foil is applied piece by piece with a hot air gun. If it is necessary to cut the edges, the roof must be glued in the appropriate places. Smaller air bubbles often remain. But usually there is no reason to worry – after a few days they will disappear on their own.
What are the advantages of installing foil?
Foils protect the paintwork and the car from environmental influences such as stones or branches. They are a cheaper alternative to repainting your car and have the same effect: repaired paint damage and faded paint disappear under the foil, and the car looks like new again. In addition, the car roof film can be removed without leaving any traces, which is not the case with paint.
What should be done before installing the car roof foil?
Car roof foil The roof of the car should be thoroughly cleaned before installing the film. Continue with detergent and degreaser. In addition, it must be ensured that the color is flawless to avoid bumps on the foil. Antennas etc. must also be removed. The roof surface must be completely clean. In addition, it is important to note that the car should never be wrapped in foil outdoors – a closed room with sufficient space that protects against wind and weather is required.
What material do you need to install the film?
In addition to the foil of your choice, you need a hot air gun (can be bought in the store), adhesive tape and, if necessary, a scalpel to cut the foil to the desired size. Rough knives and scissors are unsuitable.
What types of car foils are there?
Car wraps are available in every imaginable color. But not only can you choose between different color shades, but also between glossy, matte and metallic foils. The latest on the market are foils that change color while you drive. The car has a different color depending on the viewing angle. You also have the option of choosing between different structural foils: for example, you can give your car a leather look or snake skin. Of course, you can also cover only parts of the car. Covering the hood and roof of the car with matte foil is very popular, while the remaining parts contrast with the original glossy paint.
