Is it necessary to switch to three-phase electricity?
As a rule, all households use a single-phase connection because a three-phase connection is only needed in specific cases when a large distribution and power is required. As a rule, the three-phase connection is used for some machines such as heat pumps, furnaces or other professional tools. If you are not sure whether you need to switch to three-phase electricity, it is best to contact your electrician who will inform you about what is most suitable in your case.
What should you pay attention to when switching to three-phase current?
The most important question in the subsequent transition to three-phase electricity is whether it is even possible. If there is no high-voltage connection in the apartment or house at all, its availability must be checked first. If this is the case or if a new meter is to be installed, the feasibility of this project must first be checked by an expert. If all stages of connection are already in use, the project is only possible with great effort. In addition, it must be ensured that the wire cross-section of the cable corresponds to the power of the current. In addition to the general safety regulations, other general regulations depending on the region must be observed.
Why should you hire a professional to switch to three-phase electricity?
Transition to three-phase electricity There is always a major safety risk when working with electrical cables. Improper handling of devices and carelessness pose a danger not only to technical devices, but above all to the life and health of people, so even experienced craftsmen are strongly advised to take care of safety. Only an experienced electrician has the necessary expertise to carry out such measures. In addition, the expert will advise you on the simplest solution for your individual needs. Switching to three-phase electricity takes a lot of time, especially in older houses. In these cases, the expert can also offer you alternative solutions to the problem.
What preparations should be made before switching to three-phase electricity?
First of all, the availability of three-phase electricity must be checked. In addition, official registration of three-phase electricity may also need to be carried out. Then it is necessary to check the existing lines and connections in the house. If the connections in the house are already fully used, it is necessary to lay a new line from the junction box to the house.
Transition to a two-tariff meter
Households that do not heat their apartments with electric stoves, or rather that do not have a large consumption at night during the lower tariff when the kilowatt-hour is four times cheaper than during the day, can opt for the installation of a single-tariff meter. Two-tariff meters are the right solution for consumers who use TA stoves, which, as a rule, are charged at night when the tariff is cheaper. They can also be chosen by those who only turn on larger household consumers at night, such as boilers and washing machines and dishes. Otherwise, every citizen can get all the information related to the connection in their competent distribution.
