Why should I hire a professional to replace the main water valve?
Replacing the main water valve is not difficult, but it is necessary to be quite skilled in this and similar types of work in order to avoid major problems that arise if the valve replacement is not done correctly. First of all, it is necessary to close the water supply to the valve that you want to replace. This requires knowledge of plumbing installations and where they go in the building. It is necessary to be careful, because incorrect operation can lead to great damage. To shut off the water supply to your main valve, it may be necessary to contact the water service, which will shut off the water to the section or street where your property is located. If all this is too complicated for you and you don”t want to waste your time, contact experts/companies who know the whole procedure of closing the water, but also have the necessary tools to do this job without any problems.
What must you be aware of when you need to replace the main water valve?
Replace the main water valve First of all, it is necessary to close the water supply to that valve. Do not attempt to replace the main water valve unless the water supply has been shut off. The valve can be stuck and forcing it open can cause it to burst, which can cause major damage if the water supply to that valve is not shut off.
When should the main water valve be replaced?
The main valve is one of the most important components in the house. It is used to shut off the water in the entire building in case of a malfunction in the plumbing or in case of pipe replacement or bathroom renovation. If the main valve can no longer close properly, but the water continues to leak, in this case, it is necessary to replace the main water valve.
What is needed to replace the main water valve?
Pliers, a hammer and a wrench are required to replace the main water valve. You should also have Teflon tape or tape, filler and plaster on hand. By hiring a professional to replace your main water valve, you won”t have to think about the tools and materials needed.
How can the failure of the main water valve be avoided?
The need to close the main valve is not frequent. These are situations when, for example, a pipe breaks or a faucet needs to be replaced, or there is a leak due to the failure of other secondary valves. When this happens, the main valve must be closed to avoid serious spillage damage to your home and to eliminate the problem. But precisely because these situations occur rarely, it may happen that the main valve cannot be closed at an important moment. Probably not used for years, corrosion and deposits blocking the mechanics. But that can be easily avoided. Check the main valve every few months. By opening and closing the valve two to three times a year, you can prevent the valve from blocking and not being able to function when needed.
