Is the installation of shingles a solution for the roof?
Tegola is a roofing material adaptable to all types of roofs. Installing a jar can be cheaper compared to other covers. Much more important is the achievement of the aesthetic factor as well as successful integration into the environment. Also, roof coverings that are also insulators can have an advantage. Tegola is a light material and is suitable for weaker constructions of buildings and roofs.
What should be taken into account when placing the jar?
Before installing the tile, check the wind direction because if you place the tile incorrectly, the wind will lift or move the panels. It is important to lay the foundation. Installation of the base starts from the top of the roof. The roof surface must be flat, strong, dry and firmly attached to the structure. The substrate should be placed as flat as possible and parallel to the eaves – crossing the edge of the roof vertically by 10 cm. Drawing with chalk is a great way to be sure of your direction. The base should horizontally exceed the edge of the roof by 5 cm. The foil should be glued along the edges, finally setting the profile for the edge of the eaves. If you are not sure that you will do everything right, it is best to hire an expert.
What are the advantages of covering the roof with tile?
The biggest advantage of installing a tile is the simple handling of the tile and easy adhesion to the existing structure. Tegola is a light material and is suitable for weaker roof constructions, as well as for objects that do not need to be loaded with weight.
What should be prepared before placing the jar?
Place the jug In order to install the tile, it is necessary to determine the geometric shapes that make up the roof and calculate their individual dimensions. By adding the individual dimensions, we get the surface of the roof. It is always a good idea to order 10-15% more roofing (ridge and ridge allowances, starting strips). Installation of the base starts from the top of the roof. The roof surface must be flat, strong, dry and firmly attached to the structure. The substrate should be placed as flat as possible and parallel to the eaves – crossing the edge of the roof vertically by 10 cm. Drawing with chalk is a great way to be sure of your direction. The base should horizontally exceed the edge of the roof by 5 cm. The foil should be glued along the edges, finally setting the profile for the edge of the eaves.
What is needed from the materials for setting up the jar
Nails are the only good method for fixing the jar, precisely because of the strength of the grip. A minimum of four nails per sheet when installing, properly placing under the adhesive tape and above the clip. The nails must not protrude or sink into the jar, but must be driven straight and flush with the surface of the jar. It is necessary to provide enough space for the nail to penetrate the substrate.
What are the possibilities of placing the jar?
You can do the installation of the jar yourself, but in any case, you need a little information that will be useful to you during the installation. If you don”t want to spend your precious time on material and installation training, turn to experts who already have experience. On the Bellcom.rs portal, you can find companies that deal with the installation of tegla.
How much does it cost to set up a jar?
The price of the works will certainly depend on the surface on which the tile is placed. The height of the roof also plays an important role, as well as whether an agreement has been reached with the master on the removal of the old roof mat.
