What are the advantages of hiring an expert for parquet installation?
Parquets can be found in specific wood types, colors and structures, different board widths and finishes. In the advanced parquet installation system, the best varnishing systems have also been developed, which ensures significantly faster installation and use of the parquet. If necessary, you can install sound-absorbing insulation under the parquet as a foil or as a vapor barrier in rooms with unheated spaces under it (basement, staircases, etc.). These insulations are bought in rolls and are very easy to install on the base. In any case, it is best to hire experienced craftsmen to install parquet to make sure that your parquet will last a long time.
What should you pay attention to when installing parquet?
At the beginning, the master”s advice is to let the parquet stand unpacked for at least 24 hours in the area where it will be installed. Avoid keeping the parquet directly exposed to the sun or directly on the concrete surface. It must be flat and dry. The permissible humidity of the substrate is 2%, and if the substrate is not flat, level it with special compounds.
Which parquet installation methods are there?
Parquet installation Which method of joining boards and installing parquet should be used, whether the traditional system with the use of glue or the modern method without the use of glue. It depends to some extent on the experience of the craftsman you hired. In the case when glue is not used, the procedure can be faster and simpler, also the maximum strength of the joints is achieved immediately after joining. The floor is ready for use immediately after installation, and installation errors can be removed immediately. Damaged boards can be easily replaced. If you use glue, the installation of the parquet takes longer, because the glue must be applied in the grooves of the boards, and the excess glue must be removed immediately. The joints become completely solid only after the glue has completely dried and hardened. The room can be passable in 12 hours at the earliest, and a full load is possible only after 1-2 days. Installation errors cannot be easily removed. For this reason, it is necessary to agree in advance with the master which installation method you will use.
What preparations should be made before laying the parquet?
Before laying the parquet, unevenness of more than 3 mm in the floor should be remedied. The base must be flat and if necessary, you can place sound-absorbing insulation under the parquet as a foil or as a vapor barrier in rooms with unheated spaces (basement, staircases, etc.). You should prepare all the materials and tools you need so that you don”t waste time looking for them later.
What materials and tools are needed to install parquet?
Depending on the method of parquet installation, different tools and materials are used. You will need moldings, nails and a saw as well as tools such as angles, wire and a hammer. When gluing parquet, use parquet glue (if possible without solvent) and a trowel or notched trowel to apply the glue.
How long does it take to install parquet?
If you install the parquet using the glue-free method, you can count on about half an hour per square meter. Bonding the parquet may take a little longer. In any case, you can hire experts and thus save your time. On the Bellcom.rs portal, you can find specialized companies and hire them for parquet installation.
