Why should a professional install cruise control?
Cruise control is almost inevitable in cars today. Without it, long journeys would be much more tiring, at least for the driver, and it also reduces our chances of getting a speeding ticket. This system actually has a number of functions, apart from the basic one, which is controlling the speed of movement. For example, with the help of manual commands, pressing a button or a button, the speed of the car can be increased. Of course, there are also several safety systems – the cruise control will be deactivated the moment you press the brake, and will not activate at speeds below 40 km/h. Retrofitting cruise control is very easy for some vehicles, and very difficult for others. A lot of concentration and knowledge is necessary, because connecting the cables in particular must be well mastered. Serious damage to the vehicle can occur if there is a malfunction in the installation. For this reason, this should never be done by a person who has no experience, but the job should be left to an expert.
What should you pay attention to when installing cruise control?
First you need to consider whether retrofitting cruise control is even an option for your vehicle. Three factors decide whether a cruise control retrofit makes sense. If one of these three factors is not possible, then installing cruise control is much more difficult and probably not worth the effort. First of all, your car should ideally have an automatic transmission, as cruise control cannot work optimally with a manual transmission. Second, you need an electronic gas pedal in your vehicle, because a mechanical gas pedal must be equipped with cruise control servo motors. And thirdly, your car should have additional cruise control available.
What are the benefits of cruise control?
Installation of cruise control The installation of cruise control is very useful for long journeys (reducing driver fatigue, improving comfort through safer position changes) on highways and sparsely populated streets. Some drivers use it to subconsciously avoid speed limits. Using cruise control on the highway saves fuel by maintaining a constant speed.
What preparations should be made before installing the cruise control?
Before you start working on your car”s electronics, you must first disconnect the battery and wait at least 10 minutes to avoid getting an electric shock. Also note that the steering wheel must also be removed to install the CCS switch. Therefore, be very careful when removing the airbag, if present.
What variants are there?
How complex it is to additionally equip a car with cruise control largely depends on the type and age of the vehicle. Of course, newer cars are much easier to retrofit than older cars. In the case of older models, it may be necessary to reconstruct the installation and additional electronic modules must also be retrofitted. The installation of cruise control is best left to experienced craftsmen.
How long does it take to install cruise control?
The installation time may vary, depending on the type and age of the vehicle. Installing cruise control in an older car can take several hours. On a newer car with a pre-existing electronic connection between the gas pedal and the gas valve, the installation should be done within an hour. sr
